Ideally, a new pair of shoes should be comfortable and fashionable. However, you may find a lot of options in footwear shops that meet these 2 criteria, but at the same time their quality is so bad that they won’t last long. We decided to find out what things you should pay attention to in order to choose a really high-quality pair.
Check the shoes for smudges and glue marks.
Manufacturers often use glue to stick together different parts of the shoe. If the glue is of high quality and the work is done properly, the pair will last a long time. However, small glue drips in the spots where parts meet or traces of glue on the surface indicate that you are looking at low-quality shoes and that there were issues during production.
When a part of the shoe, its sole or insole, comes off a bit, it means the shoemaker probably used bad or expired glue, and this pair will fall apart quickly.
Examine whether the pair is symmetrical.
Quality shoes in a pair should be symmetrical, and any differences between the right and left shoes most likely indicate a defect. To check this, you need to put the soles of both shoes together and see if they match in length and width.
It’s also worth putting the pair on the floor to understand whether the height and outline of the upper edge of the heel are symmetrical. If the soles are painted in different colors, check whether the paint is within the borders of the sole and whether the pattern matches. Gross irregularities in symmetry indicate that the manufacturer didn’t pay much attention to quality.
Check the seams carefully.
Any uneven or diverging seams make shoes look not that good. This happens if the manufacturer used too thin threads or the work was done poorly. As a result, such a pair will fall apart much faster. It’s also necessary to check the uniformity of stitches and the evenness of the seam itself.
If its line is curved or zigzag-looking, this means that the shoes you’re looking at are of poor quality and will lose their appearance in a couple of months. And zigzag-looking stitch is often used to hide the imperfections of the stitching.
Examine the heels.
The heel must be firmly attached to the sole and not wobble. It’s necessary to look at the shoes from the side. In good quality pumps, the high heels are positioned exactly under the center of the heel and touch the ground at a slight incline.
It’s worth looking carefully at the heels from behind – any deviation of the heels from the angle of 90⁰ indicates a defective product. Moreover, these shoes are simply dangerous to wear – this may lead to ankle injuries.
Loose eyelets are a bad sign.
Any metal or plastic parts on the shoe (especially those that come into contact with the skin) should be tightly fastened. Thus, it’s worth carefully examining the eyelets for laces. Although this defect is quite rare, it can lead to wearer’s injury.
You should also check how well any embellishments are attached to the shoe. If they fall off at one point, the pair won’t look good anymore.
Carefully inspect the inside of the shoe.
Some manufacturers save on the training of workers and don’t calibrate equipment before the production of a new product line. As a result, shoes, boots and sneakers may have seemingly insignificant defects such as wrinkles and creases. If these defects are small, they won’t cause much trouble to the wearer. But large creases can rub the skin while walking, which will lead to abrasions and blisters on the feet.
Examine the insoles.
Even if a shoe looks perfect from the outside, you need to scrutinize it from the inside too. If the insoles show small wrinkles and creases, this pair is likely to be uncomfortable to wear. In addition, you should carefully feel the insoles to make sure that there are no bubbles on them.
Another important thing is that there must be cushioning between the insole and the sole, especially in the toe and heel area. Otherwise, a long walk in these shoes will make not only your feet and legs sore, but also your back.
Check how the shoes smell.
Low-quality and cheap shoes often have a strong chemical odor. It’s best to refrain from buying this pair. But if shoes or boots exude the scent of leather, polish or wood, you’ve found the shoes of high quality.
Take a photo of the shoes.
Of course, shoes made of synthetic materials can also be of high quality, especially when it comes to sports models. But good shoes should ideally be made of leather. They are softer and fit better on the foot, which means they will be much more comfortable to wear.
However, the quality of leather also varies. Often, manufacturers don’t mention the type of leather they use to make shoes in order to keep costs down. To determine the quality of the product you are holding in your hands, you need to take a photo of the shoes and enlarge the image. If you can see pores on the leather, you can safely buy the shoes.
Bend the shoe a little bit.
You don’t need to knead your shoes too much, but you can bend the shoe slightly to see how flexible the sole is and whether it remains attached to the upper part when moved. In addition, it’s worth pressing the sides of the shoe a little bit. Throughout the day, our feet usually increase in size a little, so a quality pair should adapt to these changes.
Check how your shoes sound.
Most shoe shops have soft carpeting on the floor, so it’s a good idea to take a short walk on a harder surface before making a purchase. If the soles and heels make unpleasant clanking noises when you walk, you are likely to be wearing a low-quality pair. And platform or wedge shoes shouldn’t sound like there are voids inside the sole.
Examine the material of the sole and heel carefully.
Usually the sole of a really good quality pair is made of leather or good rubber. These shoes are comfortable to wear, and in addition, they almost don’t slip. At the same time, if the base of the sole is uneven, then these shoes will be uncomfortable.
In addition, it’s worth examining the material from which the heels are made. If the manufacturer used plastic or didn’t cover the heel with leather or fabric, then you are looking at a cheap product that is far from being perfect.
Rub the shoes with a cloth.
Sometimes manufacturers use poor quality leather dyes, which can leave marks on the skin or clothes. Therefore, before buying, you should carefully rub the shoes inside and outside, first with a dry cloth and then with a damp cloth. If there are no marks on the fabric, the shoes are okay.
And here’s a list of fashionable shoes that are not as cool as they look.
Family Vacation Turns Nightmare: Parents of 6 Die in Rip Current Disaster
A Pennsylvania c
ouple sadly lost their lives while on vacation in Florida with their six children, after being caught in a rip current.
Brian Warter, 51, and Erica Wishart, 48, were swimming with two of their teenage children on Hutchinson Island on June 20 when they got caught in the dangerous current.
The teenagers managed to make it to safety, but their parents were unable to escape the strong ocean waves.
The Martin County Sheriff’s Office shared details about the tragic event. The statement said that the teenagers tried hard to save their parents but couldn’t fight the powerful current. Emergency services arrived quickly and started rescue efforts. Sadly, even after being taken to a nearby hospital, Brian and Erica were pronounced dead by the doctors.
Phillyburbs.com reported that the water conditions were very dangerous that Tuesday afternoon. Red flags were flying at the beach to warn swimmers about the risky rip tides, according to Cory Pippen from Martin County Fire Rescue. These flags are meant to alert people about dangerous water conditions like strong rip currents.
Larry Warter, Brian’s father, told CBS 12 News that Brian and Erica had been together for over a year and were engaged to be married. Erica was a mother of four, and Brian had two children. The couple planned to wait until all their kids finished college before getting married. Their trip to Stuart, Florida, was a big event for them.
“They were so excited about this trip,” Larry Warter said. “It was their first time taking all six kids on vacation together. They had been planning it for over a month.”
Brian Warter’s parents shared their deep love for the couple. Larry Warter said, “You could clearly see the love between Brian and Erica if you were around them.” Susie Warter, Brian’s mother, mentioned that everyone who knew the couple loved them, and there was great excitement about their future together.
The Warter family has received a lot of support from their community. “We’ve been overwhelmed by the offers of help and support. We thought we were going through this alone, but we haven’t been,” Larry Warter said.
On a fundraising page, Wayne Sallurday paid a heartfelt tribute to Erica. “Erica was an amazing person. She was a loving mother to her two sons and two daughters, with her youngest son being adopted at a young age,” the post stated.
“Erica worked at an elementary school teaching special needs children and later in the school library. She also spent a lot of time helping at her local church. We could go on and on, but you get the picture. She was one of the nicest people you could ever meet.”
The GoFundMe page created in their memory has raised over $60,000, showing the community’s generous response to the tragedy.
The National Weather Service provides important advice about rip currents on its website. It points out that while rip currents won’t pull swimmers underwater, they can quickly tire them out. Staying calm is very important.
“Trying to swim directly against a rip current will just use up your energy, which you need to survive and escape the current. Don’t swim straight to the shore. Instead, swim along the shore until you’re out of the current’s pull. Once you’re free, swim at an angle away from the current toward the shore,” the website advises. It also suggests never swimming alone and following the rule, “If in doubt, don’t go out!”
This tragic event highlights the dangers of rip currents and the need to follow safety warnings when swimming.
Leave a Reply